› Forums › AmigaOS, MorphOS et AROS › Émulation et autres OS

FS-UAE Launcher

10 sujets de 1 à 10 (sur un total de 10)

  • pulp

      2 janvier 2025 à 10h04 #382653

      J’utilise FS-UAE 3.1.66 et le launcher 3.1.68 sous debian 12, mais lorsque je clique sur démarrer il ne se passe rien. C’est comme si le launcher ne trouvait pas fs-uae qui est pourtant dans le répertoire System.

      Par contre je peut sauver la config par défaut et démarrer fs-uae dans un terminal séparé mais ce n’est pas trés pratique.

      Voici la sortie du shell :

      – Find executable in plugins dir
      Check executable /home/pulp/Documents/FS-UAE/System/FS-UAE/Linux/x86-64/fs-uae-device-helper: YES
      -> /home/pulp/Documents/FS-UAE/System/FS-UAE/Linux/x86-64/fs-uae-device-helper
      current dir (cwd): /home/pulp/Documents/FS-UAE/System/FS-UAE-Launcher/Linux/x86-64
      using fs-uae executable: /home/pulp/Documents/FS-UAE/System/FS-UAE/Linux/x86-64/fs-uae-device-helper
      [‘/home/pulp/Documents/FS-UAE/System/FS-UAE/Linux/x86-64/fs-uae-device-helper’, ‘–list’]
      b’# FS-UAE Device Helper 3.1.66\n# Keyboards:\n# Keyboards path: /home/pulp/Documents/FS-UAE/Data/Devs/Keyboards\nK: Keyboard\n# Mice:\nM: Mouse\n# Joysticks:\n# SDL_Init(SDL_INIT_JOYSTICK)\n# SDL_NumJoysticks(): 0\n# End\n’
      FIXME: ComboBox not respecting read_only(because of missing lineEdit then
      _port_1
      _port_2
      _port_3
      _port_4
      before auto-fill
      [<Device none, <Device none, <Device none, <Device none, <Device none, <Device none]
      mode for 1 is
      mode for 2 is
      mode for 3 is
      mode for 4 is
      mode for 1 is
      auto-fill 1 = <Device Keyboard
      mode for 2 is
      auto-fill 2 = <Device none
      mode for 3 is
      auto-fill 3 = <Device none
      mode for 4 is
      auto-fill 4 = <Device none
      [<Device none, <Device Keyboard, <Device none, <Device none, <Device none, <Device none] 1
      FIXME: ComboBox not respecting read_only(because of missing lineEdit then
      FIXME: ComboBox not respecting read_only(because of missing lineEdit then
      _port_1
      _port_2
      _port_3
      _port_4
      before auto-fill
      [<Device none, <Device none, <Device none, <Device none, <Device none, <Device none]
      mode for 1 is
      mode for 2 is
      mode for 3 is
      mode for 4 is
      mode for 1 is
      auto-fill 1 = <Device Keyboard
      mode for 2 is
      auto-fill 2 = <Device none
      mode for 3 is
      auto-fill 3 = <Device none
      mode for 4 is
      auto-fill 4 = <Device none
      [<Device none, <Device Keyboard, <Device none, <Device none, <Device none, <Device none] 1
      _port_1
      _port_2
      _port_3
      _port_4
      before auto-fill
      [<Device none, <Device none, <Device none, <Device none, <Device none, <Device none]
      mode for 1 is
      mode for 2 is
      mode for 3 is
      mode for 4 is
      mode for 1 is
      auto-fill 1 = <Device Keyboard
      mode for 2 is
      auto-fill 2 = <Device none
      mode for 3 is
      auto-fill 3 = <Device none
      mode for 4 is
      auto-fill 4 = <Device none
      [<Device none, <Device Keyboard, <Device none, <Device none, <Device none, <Device none] 1
      _port_1
      _port_2
      _port_3
      _port_4
      before auto-fill
      [<Device none, <Device none, <Device none, <Device none, <Device none, <Device none]
      mode for 1 is
      mode for 2 is
      mode for 3 is
      mode for 4 is
      mode for 1 is
      auto-fill 1 = <Device Keyboard
      mode for 2 is
      auto-fill 2 = <Device none
      mode for 3 is
      auto-fill 3 = <Device none
      mode for 4 is
      auto-fill 4 = <Device none
      [<Device none, <Device Keyboard, <Device none, <Device none, <Device none, <Device none] 2
      Resources.stream res/32×32/go-home.png
      ChoiceControl floppy_drive_count
      WARNING: Could not find value  » key = floppy_drive_count
      Resources.stream res/eject_button.png
      Resources.stream res/browse_file_16.png
      Resources.stream res/eject_button.png
      Resources.stream res/browse_file_16.png
      Resources.stream res/eject_button.png
      Resources.stream res/browse_file_16.png
      Resources.stream res/eject_button.png
      Resources.stream res/browse_file_16.png
      Resources.stream res/clear_button.png
      Resources.stream res/remove_button.png
      Resources.stream res/add_button.png
      QListView selectionModel <PyQt5.QtCore.QItemSelectionModel object at 0x7f9001a4fee0>
      Resources.stream res/floppy_16.png
      Resources.stream res/32×32/media-floppy.png
      ChoiceControl cdrom_drive_count
      WARNING: Could not find value  » key = cdrom_drive_count
      Resources.stream res/eject_button.png
      Resources.stream res/browse_file_16.png
      ChoiceControl cdrom_drive_0_delay
      Resources.stream res/clear_button.png
      Resources.stream res/remove_button.png
      Resources.stream res/add_button.png
      QListView selectionModel <PyQt5.QtCore.QItemSelectionModel object at 0x7f9001a67280>
      Resources.stream res/cdrom_16.png
      Resources.stream res/32×32/media-optical.png
      Resources.stream res/eject_button.png
      Resources.stream res/browse_folder_16.png
      Resources.stream res/browse_file_16.png
      Resources.stream res/eject_button.png
      Resources.stream res/browse_folder_16.png
      Resources.stream res/browse_file_16.png
      Resources.stream res/eject_button.png
      Resources.stream res/browse_folder_16.png
      Resources.stream res/browse_file_16.png
      Resources.stream res/eject_button.png
      Resources.stream res/browse_folder_16.png
      Resources.stream res/browse_file_16.png
      Resources.stream res/16×16/information.png
      Resources.stream res/32×32/drive-harddisk.png
      Resources.stream res/browse_file_16.png
      Resources.stream res/browse_file_16.png
      ChoiceControl chip_memory
      WARNING: Could not find value  » key = chip_memory
      ChoiceControl motherboard_ram
      WARNING: Could not find value  » key = motherboard_ram
      ChoiceControl slow_memory
      WARNING: Could not find value  » key = slow_memory
      ChoiceControl zorro_iii_memory
      WARNING: Could not find value  » key = zorro_iii_memory
      ChoiceControl fast_memory 8192
      ChoiceControl accelerator_memory 262144
      ChoiceControl graphics_memory
      WARNING: Could not find value  » key = graphics_memory
      Resources.stream res/32×32/application-x-firmware.png
      Resources.stream res/refresh_button.png
      FIXME: ComboBox not respecting read_only(because of missing lineEdit then
      FIXME: ComboBox not respecting read_only(because of missing lineEdit then
      _port_1
      _port_2
      _port_3
      _port_4
      before auto-fill
      [<Device none, <Device none, <Device none, <Device none, <Device none, <Device none]
      mode for 1 is
      mode for 2 is
      mode for 3 is
      mode for 4 is
      mode for 1 is
      auto-fill 1 = <Device Keyboard
      mode for 2 is
      auto-fill 2 = <Device none
      mode for 3 is
      auto-fill 3 = <Device none
      mode for 4 is
      auto-fill 4 = <Device none
      [<Device none, <Device Keyboard, <Device none, <Device none, <Device none, <Device none] 1
      Resources.stream res/16×16/lightning_off.png
      Resources.stream res/16×16/lightning_off.png
      FIXME: ComboBox not respecting read_only(because of missing lineEdit then
      FIXME: ComboBox not respecting read_only(because of missing lineEdit then
      _port_1
      _port_2
      _port_3
      _port_4
      before auto-fill
      [<Device none, <Device none, <Device none, <Device none, <Device none, <Device none]
      mode for 1 is
      mode for 2 is
      mode for 3 is
      mode for 4 is
      mode for 1 is
      auto-fill 1 = <Device Keyboard
      mode for 2 is
      auto-fill 2 = <Device none
      mode for 3 is
      auto-fill 3 = <Device none
      mode for 4 is
      auto-fill 4 = <Device none
      [<Device none, <Device Keyboard, <Device none, <Device none, <Device none, <Device none] 2
      Resources.stream res/16×16/lightning_off.png
      Resources.stream res/16×16/lightning_off.png
      FIXME: ComboBox not respecting read_only(because of missing lineEdit then
      FIXME: ComboBox not respecting read_only(because of missing lineEdit then
      _port_1
      _port_2
      _port_3
      _port_4
      before auto-fill
      [<Device none, <Device none, <Device none, <Device none, <Device none, <Device none]
      mode for 1 is
      mode for 2 is
      mode for 3 is
      mode for 4 is
      mode for 1 is
      auto-fill 1 = <Device Keyboard
      mode for 2 is
      auto-fill 2 = <Device none
      mode for 3 is
      auto-fill 3 = <Device none
      mode for 4 is
      auto-fill 4 = <Device none
      [<Device none, <Device Keyboard, <Device none, <Device none, <Device none, <Device none] 3
      Resources.stream res/16×16/lightning_off.png
      Resources.stream res/16×16/lightning_off.png
      FIXME: ComboBox not respecting read_only(because of missing lineEdit then
      FIXME: ComboBox not respecting read_only(because of missing lineEdit then
      _port_1
      _port_2
      _port_3
      _port_4
      before auto-fill
      [<Device none, <Device none, <Device none, <Device none, <Device none, <Device none]
      mode for 1 is
      mode for 2 is
      mode for 3 is
      mode for 4 is
      mode for 1 is
      auto-fill 1 = <Device Keyboard
      mode for 2 is
      auto-fill 2 = <Device none
      mode for 3 is
      auto-fill 3 = <Device none
      mode for 4 is
      auto-fill 4 = <Device none
      [<Device none, <Device Keyboard, <Device none, <Device none, <Device none, <Device none] 4
      Resources.stream res/16×16/lightning_off.png
      Resources.stream res/16×16/lightning_off.png
      FIXME: ComboBox not respecting read_only(because of missing lineEdit then
      FIXME: ComboBox not respecting read_only(because of missing lineEdit then
      _port_1
      _port_2
      _port_3
      _port_4
      before auto-fill
      [<Device none, <Device none, <Device none, <Device none, <Device none, <Device none]
      mode for 1 is
      mode for 2 is
      mode for 3 is
      mode for 4 is
      mode for 1 is
      auto-fill 1 = <Device Keyboard
      mode for 2 is
      auto-fill 2 = <Device none
      mode for 3 is
      auto-fill 3 = <Device none
      mode for 4 is
      auto-fill 4 = <Device none
      [<Device none, <Device Keyboard, <Device none, <Device none, <Device none, <Device none] 5
      Resources.stream res/16×16/information.png
      Resources.stream res/32×32/applications-games.png
      ChoiceControl accelerator
      ChoiceControl blizzard_scsi_kit
      ChoiceControl graphics_card
      ChoiceControl sound_card
      ChoiceControl network_card
      ChoiceControl bsdsocket_library
      Resources.stream res/32×32/audio-card.png
      Resources.stream res/16×16/settings.png
      ChoiceControl cpu 68020
      ChoiceControl jit_compiler
      ChoiceControl floppy_drive_speed 0
      SpinValueControl floppy_drive_volume_empty
      SpinValueControl implicit value
      ChoiceControl freezer_cartridge
      ChoiceControl dongle_type
      Resources.stream res/32×32/system-shutdown.png
      Resources.stream res/32/quick-settings-sidebar.png

      select tab 0 1
      using screen size (1366, 768)
      Resources.stream res/screenshot.png
      Resources.stream res/screenshot_overlay.png
      Resources.stream res/cover.png
      Resources.stream res/cover_overlay.png
      Resources.stream res/cover_overlay_square.png
      Resources.stream res/16×16/world.png
      Resources.stream res/16×16/pencil.png
      Resources.stream res/16×16/lock.png
      Resources.stream res/16×16/lock_open_green.png
      — protection —
      Resources.stream res/16×16/error.png
      Resources.stream res/16×16/warning_3.png
      Resources.stream res/16×16/information.png
      INFO:PLUGINS:Executable dir: /home/pulp/Documents/FS-UAE/System/FS-UAE-Launcher/Linux/x86-64
      INFO:PLUGINS:Path: [‘/home/pulp/Documents/FS-UAE/System’, ‘/home/pulp/Documents/FS-UAE/Plugins’, ‘/home/pulp/Documents/FS-UAE/Data/Plugins’, ‘/home/pulp/Documents/FS-UAE/System/Plugins’]
      INFO:PLUGINS:Machine: x86_64
      INFO:PLUGINS:Architecture: 64bit
      INFO:PLUGINS:Plugin OS/arch: Linux/x86-64
      DEBUG:PLUGINS:/home/pulp/Documents/FS-UAE/System/FS-UAE-Launcher
      INFO:PLUGINS:Load expansion /home/pulp/Documents/FS-UAE/System/FS-UAE-Launcher
      DEBUG:PLUGINS:Loading provides for ‘/home/pulp/Documents/FS-UAE/System/FS-UAE-Launcher’
      DEBUG:PLUGINS:executable:libxcb-image.so.0 -> /home/pulp/Documents/FS-UAE/System/FS-UAE-Launcher/Linux/x86-64/libxcb-image.so.0
      DEBUG:PLUGINS:executable:libicui18n.so.56 -> /home/pulp/Documents/FS-UAE/System/FS-UAE-Launcher/Linux/x86-64/libicui18n.so.56
      DEBUG:PLUGINS:library:_csv.cpython-39-x86_64-linux-gnu -> /home/pulp/Documents/FS-UAE/System/FS-UAE-Launcher/Linux/x86-64/_csv.cpython-39-x86_64-linux-gnu.so
      DEBUG:PLUGINS:executable:pyqt5 -> /home/pulp/Documents/FS-UAE/System/FS-UAE-Launcher/Linux/x86-64/PyQt5
      DEBUG:PLUGINS:library:_datetime.cpython-39-x86_64-linux-gnu -> /home/pulp/Documents/FS-UAE/System/FS-UAE-Launcher/Linux/x86-64/_datetime.cpython-39-x86_64-linux-gnu.so
      DEBUG:PLUGINS:executable:libwebpmux-fe44437b.so.3.0.7 -> /home/pulp/Documents/FS-UAE/System/FS-UAE-Launcher/Linux/x86-64/libwebpmux-fe44437b.so.3.0.7
      DEBUG:PLUGINS:executable:libxcomposite.so.1 -> /home/pulp/Documents/FS-UAE/System/FS-UAE-Launcher/Linux/x86-64/libXcomposite.so.1
      DEBUG:PLUGINS:executable:libqt5waylandclient.so.5 -> /home/pulp/Documents/FS-UAE/System/FS-UAE-Launcher/Linux/x86-64/libQt5WaylandClient.so.5
      DEBUG:PLUGINS:library:_contextvars.cpython-39-x86_64-linux-gnu -> /home/pulp/Documents/FS-UAE/System/FS-UAE-Launcher/Linux/x86-64/_contextvars.cpython-39-x86_64-linux-gnu.so
      DEBUG:PLUGINS:library:readline.cpython-39-x86_64-linux-gnu -> /home/pulp/Documents/FS-UAE/System/FS-UAE-Launcher/Linux/x86-64/readline.cpython-39-x86_64-linux-gnu.so
      DEBUG:PLUGINS:library:select.cpython-39-x86_64-linux-gnu -> /home/pulp/Documents/FS-UAE/System/FS-UAE-Launcher/Linux/x86-64/select.cpython-39-x86_64-linux-gnu.so
      DEBUG:PLUGINS:executable:libkrb5.so.3 -> /home/pulp/Documents/FS-UAE/System/FS-UAE-Launcher/Linux/x86-64/libkrb5.so.3
      DEBUG:PLUGINS:executable:libxkbcommon-x11.so.0 -> /home/pulp/Documents/FS-UAE/System/FS-UAE-Launcher/Linux/x86-64/libxkbcommon-x11.so.0
      DEBUG:PLUGINS:library:_opcode.cpython-39-x86_64-linux-gnu -> /home/pulp/Documents/FS-UAE/System/FS-UAE-Launcher/Linux/x86-64/_opcode.cpython-39-x86_64-linux-gnu.so
      DEBUG:PLUGINS:executable:libz.so.1 -> /home/pulp/Documents/FS-UAE/System/FS-UAE-Launcher/Linux/x86-64/libz.so.1
      DEBUG:PLUGINS:executable:lib -> /home/pulp/Documents/FS-UAE/System/FS-UAE-Launcher/Linux/x86-64/lib
      DEBUG:PLUGINS:executable:libxcb-shm.so.0 -> /home/pulp/Documents/FS-UAE/System/FS-UAE-Launcher/Linux/x86-64/libxcb-shm.so.0
      DEBUG:PLUGINS:executable:libqt5widgets.so.5 -> /home/pulp/Documents/FS-UAE/System/FS-UAE-Launcher/Linux/x86-64/libQt5Widgets.so.5
      DEBUG:PLUGINS:executable:libgthread-2.0.so.0 -> /home/pulp/Documents/FS-UAE/System/FS-UAE-Launcher/Linux/x86-64/libgthread-2.0.so.0
      DEBUG:PLUGINS:library:_blake2.cpython-39-x86_64-linux-gnu -> /home/pulp/Documents/FS-UAE/System/FS-UAE-Launcher/Linux/x86-64/_blake2.cpython-39-x86_64-linux-gnu.so
      DEBUG:PLUGINS:library:zlib.cpython-39-x86_64-linux-gnu -> /home/pulp/Documents/FS-UAE/System/FS-UAE-Launcher/Linux/x86-64/zlib.cpython-39-x86_64-linux-gnu.so
      DEBUG:PLUGINS:library:_queue.cpython-39-x86_64-linux-gnu -> /home/pulp/Documents/FS-UAE/System/FS-UAE-Launcher/Linux/x86-64/_queue.cpython-39-x86_64-linux-gnu.so
      DEBUG:PLUGINS:executable:libz-dd453c56.so.1.2.11 -> /home/pulp/Documents/FS-UAE/System/FS-UAE-Launcher/Linux/x86-64/libz-dd453c56.so.1.2.11
      DEBUG:PLUGINS:library:_multiprocessing.cpython-39-x86_64-linux-gnu -> /home/pulp/Documents/FS-UAE/System/FS-UAE-Launcher/Linux/x86-64/_multiprocessing.cpython-39-x86_64-linux-gnu.so
      DEBUG:PLUGINS:executable:libwayland-cursor.so.0 -> /home/pulp/Documents/FS-UAE/System/FS-UAE-Launcher/Linux/x86-64/libwayland-cursor.so.0
      DEBUG:PLUGINS:library:_sqlite3.cpython-39-x86_64-linux-gnu -> /home/pulp/Documents/FS-UAE/System/FS-UAE-Launcher/Linux/x86-64/_sqlite3.cpython-39-x86_64-linux-gnu.so
      DEBUG:PLUGINS:executable:libpng16.so.16 -> /home/pulp/Documents/FS-UAE/System/FS-UAE-Launcher/Linux/x86-64/libpng16.so.16
      DEBUG:PLUGINS:library:_codecs_hk.cpython-39-x86_64-linux-gnu -> /home/pulp/Documents/FS-UAE/System/FS-UAE-Launcher/Linux/x86-64/_codecs_hk.cpython-39-x86_64-linux-gnu.so
      DEBUG:PLUGINS:executable:libxcb-glx.so.0 -> /home/pulp/Documents/FS-UAE/System/FS-UAE-Launcher/Linux/x86-64/libxcb-glx.so.0
      DEBUG:PLUGINS:library:lzhlib.cpython-39-x86_64-linux-gnu -> /home/pulp/Documents/FS-UAE/System/FS-UAE-Launcher/Linux/x86-64/lzhlib.cpython-39-x86_64-linux-gnu.so
      DEBUG:PLUGINS:executable:launcher -> /home/pulp/Documents/FS-UAE/System/FS-UAE-Launcher/Linux/x86-64/launcher
      DEBUG:PLUGINS:library:_lzma.cpython-39-x86_64-linux-gnu -> /home/pulp/Documents/FS-UAE/System/FS-UAE-Launcher/Linux/x86-64/_lzma.cpython-39-x86_64-linux-gnu.so
      DEBUG:PLUGINS:executable:libx11-xcb.so.1 -> /home/pulp/Documents/FS-UAE/System/FS-UAE-Launcher/Linux/x86-64/libX11-xcb.so.1
      DEBUG:PLUGINS:executable:libtiff-8e99fb9e.so.5.7.0 -> /home/pulp/Documents/FS-UAE/System/FS-UAE-Launcher/Linux/x86-64/libtiff-8e99fb9e.so.5.7.0
      DEBUG:PLUGINS:executable:libqt5network.so.5 -> /home/pulp/Documents/FS-UAE/System/FS-UAE-Launcher/Linux/x86-64/libQt5Network.so.5
      DEBUG:PLUGINS:executable:libcrypto.so.1.1 -> /home/pulp/Documents/FS-UAE/System/FS-UAE-Launcher/Linux/x86-64/libcrypto.so.1.1
      DEBUG:PLUGINS:executable:libqt5dbus.so.5 -> /home/pulp/Documents/FS-UAE/System/FS-UAE-Launcher/Linux/x86-64/libQt5DBus.so.5
      DEBUG:PLUGINS:executable:libtinfo.so.5 -> /home/pulp/Documents/FS-UAE/System/FS-UAE-Launcher/Linux/x86-64/libtinfo.so.5
      DEBUG:PLUGINS:library:_sha512.cpython-39-x86_64-linux-gnu -> /home/pulp/Documents/FS-UAE/System/FS-UAE-Launcher/Linux/x86-64/_sha512.cpython-39-x86_64-linux-gnu.so
      DEBUG:PLUGINS:executable:libxcb-randr.so.0 -> /home/pulp/Documents/FS-UAE/System/FS-UAE-Launcher/Linux/x86-64/libxcb-randr.so.0
      DEBUG:PLUGINS:library:array.cpython-39-x86_64-linux-gnu -> /home/pulp/Documents/FS-UAE/System/FS-UAE-Launcher/Linux/x86-64/array.cpython-39-x86_64-linux-gnu.so
      DEBUG:PLUGINS:library:_codecs_kr.cpython-39-x86_64-linux-gnu -> /home/pulp/Documents/FS-UAE/System/FS-UAE-Launcher/Linux/x86-64/_codecs_kr.cpython-39-x86_64-linux-gnu.so
      DEBUG:PLUGINS:executable:libstdc++.so.6 -> /home/pulp/Documents/FS-UAE/System/FS-UAE-Launcher/Linux/x86-64/libstdc++.so.6
      DEBUG:PLUGINS:library:grp.cpython-39-x86_64-linux-gnu -> /home/pulp/Documents/FS-UAE/System/FS-UAE-Launcher/Linux/x86-64/grp.cpython-39-x86_64-linux-gnu.so
      DEBUG:PLUGINS:executable:libsystemd.so.0 -> /home/pulp/Documents/FS-UAE/System/FS-UAE-Launcher/Linux/x86-64/libsystemd.so.0
      DEBUG:PLUGINS:executable:libk5crypto.so.3 -> /home/pulp/Documents/FS-UAE/System/FS-UAE-Launcher/Linux/x86-64/libk5crypto.so.3
      DEBUG:PLUGINS:library:_codecs_iso2022.cpython-39-x86_64-linux-gnu -> /home/pulp/Documents/FS-UAE/System/FS-UAE-Launcher/Linux/x86-64/_codecs_iso2022.cpython-39-x86_64-linux-gnu.so
      DEBUG:PLUGINS:executable:libqt5svg.so.5 -> /home/pulp/Documents/FS-UAE/System/FS-UAE-Launcher/Linux/x86-64/libQt5Svg.so.5
      DEBUG:PLUGINS:executable:libicuuc.so.56 -> /home/pulp/Documents/FS-UAE/System/FS-UAE-Launcher/Linux/x86-64/libicuuc.so.56
      DEBUG:PLUGINS:executable:libcom_err.so.2 -> /home/pulp/Documents/FS-UAE/System/FS-UAE-Launcher/Linux/x86-64/libcom_err.so.2
      DEBUG:PLUGINS:library:_bisect.cpython-39-x86_64-linux-gnu -> /home/pulp/Documents/FS-UAE/System/FS-UAE-Launcher/Linux/x86-64/_bisect.cpython-39-x86_64-linux-gnu.so
      DEBUG:PLUGINS:executable:arcade -> /home/pulp/Documents/FS-UAE/System/FS-UAE-Launcher/Linux/x86-64/arcade
      DEBUG:PLUGINS:executable:libkeyutils.so.1 -> /home/pulp/Documents/FS-UAE/System/FS-UAE-Launcher/Linux/x86-64/libkeyutils.so.1
      DEBUG:PLUGINS:executable:libpython3.9.so.1.0 -> /home/pulp/Documents/FS-UAE/System/FS-UAE-Launcher/Linux/x86-64/libpython3.9.so.1.0
      DEBUG:PLUGINS:executable:libxcb-render.so.0 -> /home/pulp/Documents/FS-UAE/System/FS-UAE-Launcher/Linux/x86-64/libxcb-render.so.0
      DEBUG:PLUGINS:executable:libxcb-1122e22b.so.1.1.0 -> /home/pulp/Documents/FS-UAE/System/FS-UAE-Launcher/Linux/x86-64/libxcb-1122e22b.so.1.1.0
      DEBUG:PLUGINS:executable:fsgs -> /home/pulp/Documents/FS-UAE/System/FS-UAE-Launcher/Linux/x86-64/fsgs
      DEBUG:PLUGINS:library:termios.cpython-39-x86_64-linux-gnu -> /home/pulp/Documents/FS-UAE/System/FS-UAE-Launcher/Linux/x86-64/termios.cpython-39-x86_64-linux-gnu.so
      DEBUG:PLUGINS:executable:libxau.so.6 -> /home/pulp/Documents/FS-UAE/System/FS-UAE-Launcher/Linux/x86-64/libXau.so.6
      DEBUG:PLUGINS:library:_sha256.cpython-39-x86_64-linux-gnu -> /home/pulp/Documents/FS-UAE/System/FS-UAE-Launcher/Linux/x86-64/_sha256.cpython-39-x86_64-linux-gnu.so
      DEBUG:PLUGINS:executable:libgcc_s.so.1 -> /home/pulp/Documents/FS-UAE/System/FS-UAE-Launcher/Linux/x86-64/libgcc_s.so.1
      DEBUG:PLUGINS:library:_struct.cpython-39-x86_64-linux-gnu -> /home/pulp/Documents/FS-UAE/System/FS-UAE-Launcher/Linux/x86-64/_struct.cpython-39-x86_64-linux-gnu.so
      DEBUG:PLUGINS:executable:libwebp-d8a3db66.so.7.1.2 -> /home/pulp/Documents/FS-UAE/System/FS-UAE-Launcher/Linux/x86-64/libwebp-d8a3db66.so.7.1.2
      DEBUG:PLUGINS:executable:libxcb-sync.so.1 -> /home/pulp/Documents/FS-UAE/System/FS-UAE-Launcher/Linux/x86-64/libxcb-sync.so.1
      DEBUG:PLUGINS:executable:libjpeg-b8a30ecc.so.62.3.0 -> /home/pulp/Documents/FS-UAE/System/FS-UAE-Launcher/Linux/x86-64/libjpeg-b8a30ecc.so.62.3.0
      DEBUG:PLUGINS:library:_codecs_jp.cpython-39-x86_64-linux-gnu -> /home/pulp/Documents/FS-UAE/System/FS-UAE-Launcher/Linux/x86-64/_codecs_jp.cpython-39-x86_64-linux-gnu.so
      DEBUG:PLUGINS:executable:libwayland-client.so.0 -> /home/pulp/Documents/FS-UAE/System/FS-UAE-Launcher/Linux/x86-64/libwayland-client.so.0
      DEBUG:PLUGINS:executable:libdbus-1.so.3 -> /home/pulp/Documents/FS-UAE/System/FS-UAE-Launcher/Linux/x86-64/libdbus-1.so.3
      DEBUG:PLUGINS:executable:libxcb-shape.so.0 -> /home/pulp/Documents/FS-UAE/System/FS-UAE-Launcher/Linux/x86-64/libxcb-shape.so.0
      DEBUG:PLUGINS:library:mmap.cpython-39-x86_64-linux-gnu -> /home/pulp/Documents/FS-UAE/System/FS-UAE-Launcher/Linux/x86-64/mmap.cpython-39-x86_64-linux-gnu.so
      DEBUG:PLUGINS:executable:libqt5gui.so.5 -> /home/pulp/Documents/FS-UAE/System/FS-UAE-Launcher/Linux/x86-64/libQt5Gui.so.5
      DEBUG:PLUGINS:executable:libffi.so.6 -> /home/pulp/Documents/FS-UAE/System/FS-UAE-Launcher/Linux/x86-64/libffi.so.6
      DEBUG:PLUGINS:library:_random.cpython-39-x86_64-linux-gnu -> /home/pulp/Documents/FS-UAE/System/FS-UAE-Launcher/Linux/x86-64/_random.cpython-39-x86_64-linux-gnu.so
      DEBUG:PLUGINS:executable:certifi -> /home/pulp/Documents/FS-UAE/System/FS-UAE-Launcher/Linux/x86-64/certifi
      DEBUG:PLUGINS:executable:zlib -> /home/pulp/Documents/FS-UAE/System/FS-UAE-Launcher/Linux/x86-64/zlib
      DEBUG:PLUGINS:executable:pil -> /home/pulp/Documents/FS-UAE/System/FS-UAE-Launcher/Linux/x86-64/PIL
      DEBUG:PLUGINS:executable:liblzma-d540a118.so.5.2.5 -> /home/pulp/Documents/FS-UAE/System/FS-UAE-Launcher/Linux/x86-64/liblzma-d540a118.so.5.2.5
      DEBUG:PLUGINS:library:binascii.cpython-39-x86_64-linux-gnu -> /home/pulp/Documents/FS-UAE/System/FS-UAE-Launcher/Linux/x86-64/binascii.cpython-39-x86_64-linux-gnu.so
      DEBUG:PLUGINS:executable:_struct -> /home/pulp/Documents/FS-UAE/System/FS-UAE-Launcher/Linux/x86-64/_struct
      DEBUG:PLUGINS:executable:libxcb-xkb.so.1 -> /home/pulp/Documents/FS-UAE/System/FS-UAE-Launcher/Linux/x86-64/libxcb-xkb.so.1
      DEBUG:PLUGINS:executable:libreadline.so.7 -> /home/pulp/Documents/FS-UAE/System/FS-UAE-Launcher/Linux/x86-64/libreadline.so.7
      DEBUG:PLUGINS:executable:libqt5quick.so.5 -> /home/pulp/Documents/FS-UAE/System/FS-UAE-Launcher/Linux/x86-64/libQt5Quick.so.5
      DEBUG:PLUGINS:library:_decimal.cpython-39-x86_64-linux-gnu -> /home/pulp/Documents/FS-UAE/System/FS-UAE-Launcher/Linux/x86-64/_decimal.cpython-39-x86_64-linux-gnu.so
      DEBUG:PLUGINS:library:_posixsubprocess.cpython-39-x86_64-linux-gnu -> /home/pulp/Documents/FS-UAE/System/FS-UAE-Launcher/Linux/x86-64/_posixsubprocess.cpython-39-x86_64-linux-gnu.so
      DEBUG:PLUGINS:executable:libglib-2.0.so.0 -> /home/pulp/Documents/FS-UAE/System/FS-UAE-Launcher/Linux/x86-64/libglib-2.0.so.0
      DEBUG:PLUGINS:executable:libgcrypt.so.20 -> /home/pulp/Documents/FS-UAE/System/FS-UAE-Launcher/Linux/x86-64/libgcrypt.so.20
      DEBUG:PLUGINS:library:math.cpython-39-x86_64-linux-gnu -> /home/pulp/Documents/FS-UAE/System/FS-UAE-Launcher/Linux/x86-64/math.cpython-39-x86_64-linux-gnu.so
      DEBUG:PLUGINS:executable:libx11.so.6 -> /home/pulp/Documents/FS-UAE/System/FS-UAE-Launcher/Linux/x86-64/libX11.so.6
      DEBUG:PLUGINS:executable:libopenjp2-430a98fc.so.2.4.0 -> /home/pulp/Documents/FS-UAE/System/FS-UAE-Launcher/Linux/x86-64/libopenjp2-430a98fc.so.2.4.0
      DEBUG:PLUGINS:executable:libbsd.so.0 -> /home/pulp/Documents/FS-UAE/System/FS-UAE-Launcher/Linux/x86-64/libbsd.so.0
      DEBUG:PLUGINS:executable:libwayland-egl.so.1 -> /home/pulp/Documents/FS-UAE/System/FS-UAE-Launcher/Linux/x86-64/libwayland-egl.so.1
      DEBUG:PLUGINS:library:_asyncio.cpython-39-x86_64-linux-gnu -> /home/pulp/Documents/FS-UAE/System/FS-UAE-Launcher/Linux/x86-64/_asyncio.cpython-39-x86_64-linux-gnu.so
      DEBUG:PLUGINS:executable:libxau-00ec42fe.so.6.0.0 -> /home/pulp/Documents/FS-UAE/System/FS-UAE-Launcher/Linux/x86-64/libXau-00ec42fe.so.6.0.0
      DEBUG:PLUGINS:executable:include -> /home/pulp/Documents/FS-UAE/System/FS-UAE-Launcher/Linux/x86-64/include
      DEBUG:PLUGINS:executable:fs-uae-launcher -> /home/pulp/Documents/FS-UAE/System/FS-UAE-Launcher/Linux/x86-64/fs-uae-launcher
      DEBUG:PLUGINS:executable:libxcb-icccm.so.4 -> /home/pulp/Documents/FS-UAE/System/FS-UAE-Launcher/Linux/x86-64/libxcb-icccm.so.4
      DEBUG:PLUGINS:library:pyexpat.cpython-39-x86_64-linux-gnu -> /home/pulp/Documents/FS-UAE/System/FS-UAE-Launcher/Linux/x86-64/pyexpat.cpython-39-x86_64-linux-gnu.so
      DEBUG:PLUGINS:executable:libicudata.so.56 -> /home/pulp/Documents/FS-UAE/System/FS-UAE-Launcher/Linux/x86-64/libicudata.so.56
      DEBUG:PLUGINS:library:_statistics.cpython-39-x86_64-linux-gnu -> /home/pulp/Documents/FS-UAE/System/FS-UAE-Launcher/Linux/x86-64/_statistics.cpython-39-x86_64-linux-gnu.so
      DEBUG:PLUGINS:executable:liblzma.so.5 -> /home/pulp/Documents/FS-UAE/System/FS-UAE-Launcher/Linux/x86-64/liblzma.so.5
      DEBUG:PLUGINS:library:_heapq.cpython-39-x86_64-linux-gnu -> /home/pulp/Documents/FS-UAE/System/FS-UAE-Launcher/Linux/x86-64/_heapq.cpython-39-x86_64-linux-gnu.so
      DEBUG:PLUGINS:executable:libxcb-xinerama.so.0 -> /home/pulp/Documents/FS-UAE/System/FS-UAE-Launcher/Linux/x86-64/libxcb-xinerama.so.0
      DEBUG:PLUGINS:executable:libsqlite3.so.0 -> /home/pulp/Documents/FS-UAE/System/FS-UAE-Launcher/Linux/x86-64/libsqlite3.so.0
      DEBUG:PLUGINS:executable:libgpg-error.so.0 -> /home/pulp/Documents/FS-UAE/System/FS-UAE-Launcher/Linux/x86-64/libgpg-error.so.0
      DEBUG:PLUGINS:library:_codecs_tw.cpython-39-x86_64-linux-gnu -> /home/pulp/Documents/FS-UAE/System/FS-UAE-Launcher/Linux/x86-64/_codecs_tw.cpython-39-x86_64-linux-gnu.so
      DEBUG:PLUGINS:executable:libqt5xcbqpa.so.5 -> /home/pulp/Documents/FS-UAE/System/FS-UAE-Launcher/Linux/x86-64/libQt5XcbQpa.so.5
      DEBUG:PLUGINS:library:_ctypes.cpython-39-x86_64-linux-gnu -> /home/pulp/Documents/FS-UAE/System/FS-UAE-Launcher/Linux/x86-64/_ctypes.cpython-39-x86_64-linux-gnu.so
      DEBUG:PLUGINS:executable:libxkbcommon.so.0 -> /home/pulp/Documents/FS-UAE/System/FS-UAE-Launcher/Linux/x86-64/libxkbcommon.so.0
      DEBUG:PLUGINS:executable:libqt5x11extras.so.5 -> /home/pulp/Documents/FS-UAE/System/FS-UAE-Launcher/Linux/x86-64/libQt5X11Extras.so.5
      DEBUG:PLUGINS:executable:libxcb-xfixes.so.0 -> /home/pulp/Documents/FS-UAE/System/FS-UAE-Launcher/Linux/x86-64/libxcb-xfixes.so.0
      DEBUG:PLUGINS:executable:libxdmcp.so.6 -> /home/pulp/Documents/FS-UAE/System/FS-UAE-Launcher/Linux/x86-64/libXdmcp.so.6
      DEBUG:PLUGINS:library:_hashlib.cpython-39-x86_64-linux-gnu -> /home/pulp/Documents/FS-UAE/System/FS-UAE-Launcher/Linux/x86-64/_hashlib.cpython-39-x86_64-linux-gnu.so
      DEBUG:PLUGINS:executable:workspace -> /home/pulp/Documents/FS-UAE/System/FS-UAE-Launcher/Linux/x86-64/workspace
      DEBUG:PLUGINS:executable:libkrb5support.so.0 -> /home/pulp/Documents/FS-UAE/System/FS-UAE-Launcher/Linux/x86-64/libkrb5support.so.0
      DEBUG:PLUGINS:executable:liblz4.so.1 -> /home/pulp/Documents/FS-UAE/System/FS-UAE-Launcher/Linux/x86-64/liblz4.so.1
      DEBUG:PLUGINS:library:_pickle.cpython-39-x86_64-linux-gnu -> /home/pulp/Documents/FS-UAE/System/FS-UAE-Launcher/Linux/x86-64/_pickle.cpython-39-x86_64-linux-gnu.so
      DEBUG:PLUGINS:executable:libwebpdemux-f117ddb4.so.2.0.8 -> /home/pulp/Documents/FS-UAE/System/FS-UAE-Launcher/Linux/x86-64/libwebpdemux-f117ddb4.so.2.0.8
      DEBUG:PLUGINS:library:_sha1.cpython-39-x86_64-linux-gnu -> /home/pulp/Documents/FS-UAE/System/FS-UAE-Launcher/Linux/x86-64/_sha1.cpython-39-x86_64-linux-gnu.so
      DEBUG:PLUGINS:executable:libssl.so.1.1 -> /home/pulp/Documents/FS-UAE/System/FS-UAE-Launcher/Linux/x86-64/libssl.so.1.1
      DEBUG:PLUGINS:executable:libqt5core.so.5 -> /home/pulp/Documents/FS-UAE/System/FS-UAE-Launcher/Linux/x86-64/libQt5Core.so.5
      DEBUG:PLUGINS:executable:libxcb-keysyms.so.1 -> /home/pulp/Documents/FS-UAE/System/FS-UAE-Launcher/Linux/x86-64/libxcb-keysyms.so.1
      DEBUG:PLUGINS:library:_bz2.cpython-39-x86_64-linux-gnu -> /home/pulp/Documents/FS-UAE/System/FS-UAE-Launcher/Linux/x86-64/_bz2.cpython-39-x86_64-linux-gnu.so
      DEBUG:PLUGINS:executable:libxcb-util.so.1 -> /home/pulp/Documents/FS-UAE/System/FS-UAE-Launcher/Linux/x86-64/libxcb-util.so.1
      DEBUG:PLUGINS:executable:libxcb-render-util.so.0 -> /home/pulp/Documents/FS-UAE/System/FS-UAE-Launcher/Linux/x86-64/libxcb-render-util.so.0
      DEBUG:PLUGINS:library:_elementtree.cpython-39-x86_64-linux-gnu -> /home/pulp/Documents/FS-UAE/System/FS-UAE-Launcher/Linux/x86-64/_elementtree.cpython-39-x86_64-linux-gnu.so
      DEBUG:PLUGINS:executable:libqt5qmlmodels.so.5 -> /home/pulp/Documents/FS-UAE/System/FS-UAE-Launcher/Linux/x86-64/libQt5QmlModels.so.5
      DEBUG:PLUGINS:library:resource.cpython-39-x86_64-linux-gnu -> /home/pulp/Documents/FS-UAE/System/FS-UAE-Launcher/Linux/x86-64/resource.cpython-39-x86_64-linux-gnu.so
      DEBUG:PLUGINS:executable:libgssapi_krb5.so.2 -> /home/pulp/Documents/FS-UAE/System/FS-UAE-Launcher/Linux/x86-64/libgssapi_krb5.so.2
      DEBUG:PLUGINS:executable:libxext.so.6 -> /home/pulp/Documents/FS-UAE/System/FS-UAE-Launcher/Linux/x86-64/libXext.so.6
      DEBUG:PLUGINS:executable:fsui -> /home/pulp/Documents/FS-UAE/System/FS-UAE-Launcher/Linux/x86-64/fsui
      DEBUG:PLUGINS:library:_socket.cpython-39-x86_64-linux-gnu -> /home/pulp/Documents/FS-UAE/System/FS-UAE-Launcher/Linux/x86-64/_socket.cpython-39-x86_64-linux-gnu.so
      DEBUG:PLUGINS:library:_md5.cpython-39-x86_64-linux-gnu -> /home/pulp/Documents/FS-UAE/System/FS-UAE-Launcher/Linux/x86-64/_md5.cpython-39-x86_64-linux-gnu.so
      DEBUG:PLUGINS:executable:libqt5qml.so.5 -> /home/pulp/Documents/FS-UAE/System/FS-UAE-Launcher/Linux/x86-64/libQt5Qml.so.5
      DEBUG:PLUGINS:library:_multibytecodec.cpython-39-x86_64-linux-gnu -> /home/pulp/Documents/FS-UAE/System/FS-UAE-Launcher/Linux/x86-64/_multibytecodec.cpython-39-x86_64-linux-gnu.so
      DEBUG:PLUGINS:library:_sha3.cpython-39-x86_64-linux-gnu -> /home/pulp/Documents/FS-UAE/System/FS-UAE-Launcher/Linux/x86-64/_sha3.cpython-39-x86_64-linux-gnu.so
      DEBUG:PLUGINS:executable:libqt5websockets.so.5 -> /home/pulp/Documents/FS-UAE/System/FS-UAE-Launcher/Linux/x86-64/libQt5WebSockets.so.5
      DEBUG:PLUGINS:library:_codecs_cn.cpython-39-x86_64-linux-gnu -> /home/pulp/Documents/FS-UAE/System/FS-UAE-Launcher/Linux/x86-64/_codecs_cn.cpython-39-x86_64-linux-gnu.so
      DEBUG:PLUGINS:library:_json.cpython-39-x86_64-linux-gnu -> /home/pulp/Documents/FS-UAE/System/FS-UAE-Launcher/Linux/x86-64/_json.cpython-39-x86_64-linux-gnu.so
      DEBUG:PLUGINS:library:unicodedata.cpython-39-x86_64-linux-gnu -> /home/pulp/Documents/FS-UAE/System/FS-UAE-Launcher/Linux/x86-64/unicodedata.cpython-39-x86_64-linux-gnu.so
      DEBUG:PLUGINS:executable:libqt5opengl.so.5 -> /home/pulp/Documents/FS-UAE/System/FS-UAE-Launcher/Linux/x86-64/libQt5OpenGL.so.5
      DEBUG:PLUGINS:executable:libexpat.so.1 -> /home/pulp/Documents/FS-UAE/System/FS-UAE-Launcher/Linux/x86-64/libexpat.so.1
      DEBUG:PLUGINS:library:_posixshmem.cpython-39-x86_64-linux-gnu -> /home/pulp/Documents/FS-UAE/System/FS-UAE-Launcher/Linux/x86-64/_posixshmem.cpython-39-x86_64-linux-gnu.so
      DEBUG:PLUGINS:executable:libpcre.so.3 -> /home/pulp/Documents/FS-UAE/System/FS-UAE-Launcher/Linux/x86-64/libpcre.so.3
      DEBUG:PLUGINS:executable:libbz2.so.1.0 -> /home/pulp/Documents/FS-UAE/System/FS-UAE-Launcher/Linux/x86-64/libbz2.so.1.0
      DEBUG:PLUGINS:library:_ssl.cpython-39-x86_64-linux-gnu -> /home/pulp/Documents/FS-UAE/System/FS-UAE-Launcher/Linux/x86-64/_ssl.cpython-39-x86_64-linux-gnu.so
      DEBUG:PLUGINS:Found plugin in /home/pulp/Documents/FS-UAE/System/FS-UAE-Launcher
      DEBUG:PLUGINS:/home/pulp/Documents/FS-UAE/System/FS-UAE
      INFO:PLUGINS:Load expansion /home/pulp/Documents/FS-UAE/System/FS-UAE
      DEBUG:PLUGINS:Loading provides for ‘/home/pulp/Documents/FS-UAE/System/FS-UAE’
      DEBUG:PLUGINS:executable:fs-uae -> /home/pulp/Documents/FS-UAE/System/FS-UAE/Linux/x86-64/fs-uae
      DEBUG:PLUGINS:executable:fs-uae-device-helper -> /home/pulp/Documents/FS-UAE/System/FS-UAE/Linux/x86-64/fs-uae-device-helper
      DEBUG:PLUGINS:Found plugin in /home/pulp/Documents/FS-UAE/System/FS-UAE

      GOT x_joy_emu_conflict

      set_kickstart_from_model
      update_kickstart_in_config
      Resources.stream res/16×16/flag-jp.png
      Resources.stream res/16×16/flag-fi.png
      Resources.stream res/16×16/flag-no.png
      Resources.stream res/16×16/flag-no.png
      Resources.stream res/16×16/flag-no.png
      Resources.stream res/16×16/flag-dk.png
      Resources.stream res/16×16/flag-se.png
      Resources.stream res/16×16/flag-pl.png
      Resources.stream res/16×16/flag-it.png
      Resources.stream res/16×16/flag-es.png
      Resources.stream res/16×16/flag-fr.png
      Resources.stream res/16×16/flag-de.png
      Resources.stream res/16×16/flag-gb.png
      Resources.stream res/16×16/user.png
      Resources.stream res/16×16/world_link.png
      Resources.stream res/16×16/drop_down_arrow.png
      Resources.stream res/16×16/drop_down_arrow_disabled.png
      Window.set_size (1231, 637)
      RealWindow.set_size (1231, 637)
      RealWindow.set_size final size (1231, 637)
      set_maximized True
      libGL error: MESA-LOADER: failed to open radeonsi: /usr/lib/dri/radeonsi_dri.so: Ne peut ouvrir le fichier d’objet partagé: Aucun fichier ou dossier de ce type (search paths /usr/lib/x86_64-linux-gnu/dri:\$${ORIGIN}/dri:/usr/lib/dri, suffix _dri)
      libGL error: failed to load driver: radeonsi
      libGL error: MESA-LOADER: failed to open radeonsi: /usr/lib/dri/radeonsi_dri.so: Ne peut ouvrir le fichier d’objet partagé: Aucun fichier ou dossier de ce type (search paths /usr/lib/x86_64-linux-gnu/dri:\$${ORIGIN}/dri:/usr/lib/dri, suffix _dri)
      libGL error: failed to load driver: radeonsi
      libGL error: MESA-LOADER: failed to open swrast: /usr/lib/dri/swrast_dri.so: Ne peut ouvrir le fichier d’objet partagé: Aucun fichier ou dossier de ce type (search paths /usr/lib/x86_64-linux-gnu/dri:\$${ORIGIN}/dri:/usr/lib/dri, suffix _dri)
      libGL error: failed to load driver: swrast
      RealWindow.resizeEvent 1231 637
      PyQt5.QtCore.QSize(1231, 637) vs PyQt5.QtCore.QSize(1231, 637)
      RealWindow.resize_to 1231 637
      size after showMaximized (1231, 637)
      DEBUG:urllib3.connectionpool:Starting new HTTPS connection (1): fs-uae.net:443
      RealWindow.resizeEvent 1366 717
      PyQt5.QtCore.QSize(1366, 717) vs PyQt5.QtCore.QSize(1366, 717)
      RealWindow.resize_to 1366 717
      DEBUG:urllib3.connectionpool:https://fs-uae.net:443 « GET /stable/latest-linux HTTP/1.1 » 200 6
      latest version available: 3.0.5
      current version: 3.1.68
      update check result: -1
      START LOCAL GAME
      x_missing_files
      set_kickstart_from_model
      update_kickstart_in_config
      LaunchDialog parent = <launcher.ui.launcherwindow.LauncherWindow object at 0x7f9001eb9310>
      Adding window reference <launcher.ui.launch.LaunchDialog object at 0x7f9001637a60>
      Resources.stream res/fs_uae_group.png
      Window.set_size (400, 135)
      RealWindow.set_size (400, 135)
      RealWindow.set_size final size (400, 135)
      (0, 0) (1366, 717) (400, 135)
      <Task « Amiga Launch Task »> starting
      LaunchHandler.run_sequence
      LaunchHandler.prepare
      temp dir /tmp/fs-uae-ws9f1xe8
      state dir /home/pulp/Documents/FS-UAE/Save States/Default
      LaunchHandler.prepare_roms
      — Préparation ROMs Kickstart… —
      [ROM] kickstart_file [‘e21545723fe8374e91342617604f1b3d703094f1’]
      Kickstart 3.1.rom
      [ARCHIVE] Split path Kickstart 3.1.rom
      [ARCHIVE] Split path Kickstart 3.1.rom
      [ROM] Checking ‘/home/pulp/Documents/FS-UAE/Kickstarts/Kickstart 3.1.rom’
      [ARCHIVE] Split path /home/pulp/Documents/FS-UAE/Kickstarts/Kickstart 3.1.rom
      [ARCHIVE] Split path /home/pulp/Documents/FS-UAE/Kickstarts/Kickstart 3.1.rom
      [ARCHIVE] Split path /home/pulp/Documents/FS-UAE/Kickstarts/Kickstart 3.1.rom
      decrypt_archive_rom /home/pulp/Documents/FS-UAE/Kickstarts/Kickstart 3.1.rom
      [Archive] Open ‘/home/pulp/Documents/FS-UAE/Kickstarts/Kickstart 3.1.rom’
      [ARCHIVE] Split path /home/pulp/Documents/FS-UAE/Kickstarts/Kickstart 3.1.rom
      LaunchHandler.copy_floppies
      — Préparation des images de disquettes… —
      floppy image list is empty
      Resources.stream amiga/adf_save_disk.dat
      LaunchHandler.prepare_cdroms
      CD-ROM image list is empty
      LaunchHandler.prepare_hard_drives
      — Préparation du disque dur… —
      LaunchHandler.init_changes

      ——————————————————————————-
      CHANGEHANDLER INIT
      /tmp/fs-uae-ws9f1xe8
      Merging preserved changes in /home/pulp/Documents/FS-UAE/Save States/Default to /tmp/fs-uae-ws9f1xe8
      ignoring California Games (1988)(U.S. Gold)[cr QTX](Disk 2 of 2)(Data)[a].sdf
      ignoring Xmas_Syman.sdf
      ignoring Saved State 6.uss
      ignoring Saved State 7.uss
      ignoring Saved State 5.uss
      ignoring Saved State 3.uss
      ignoring Saved State 4.uss
      ignoring ChristmasAdv.sdf
      ignoring Saved State 1.uss
      ignoring Saved State 2.uss
      ignoring TurboSprint_AGA.sdf
      – updating file CDTV Storage.nvr
      ignoring Saved State 9.uss
      ignoring Saved State 8.uss
      create_file_version_list
      – found 3 files (checksummed)
      done
      LaunchHandler.run
      — __run__ —
      create_fsuae_config

      ——————————————————————————
      CONFIG
      accelerator  »
      accelerator_memory ‘262144’
      amiga_model ‘A1200’
      base_dir ‘/home/pulp/Documents/FS-UAE’
      cdroms_dir ‘/home/pulp/Documents/FS-UAE/CD-ROMs’
      config_path ‘/home/pulp/Documents/FS-UAE/Configurations/Default.fs-uae’
      configurations_dir ‘/home/pulp/Documents/FS-UAE/Configurations’
      controllers_dir ‘/home/pulp/Documents/FS-UAE/Controllers’
      cpu ‘68020’
      end_config ‘1’
      fast_memory ‘8192’
      flash_memory_dir  »
      floppies_dir ‘/tmp/fs-uae-ws9f1xe8’
      floppy_drive_speed ‘0’
      floppy_drive_volume_empty ‘0’
      floppy_image_0 ‘Save Disk.adf’
      floppy_overlays_dir  »
      freezer_cartridge  »
      fullscreen ‘0’
      graphics_card  »
      hard_drive_0 ‘WB’
      hard_drive_1 ‘W1’
      hard_drive_2  »
      hard_drive_3  »
      hard_drive_4  »
      hard_drive_5  »
      hard_drive_6  »
      hard_drive_7  »
      hard_drive_8  »
      hard_drive_9  »
      hard_drives_dir ‘/home/pulp/Documents/FS-UAE/Hard Drives’
      joystick_port_0 ‘Mouse’
      joystick_port_0_mode ‘mouse’
      joystick_port_1 ‘Keyboard’
      joystick_port_1_mode ‘joystick’
      joystick_port_2 ‘none’
      joystick_port_2_mode ‘none’
      joystick_port_3 ‘none’
      joystick_port_3_mode ‘none’
      kickstart_ext_file  »
      kickstart_file ‘/tmp/fs-uae-ws9f1xe8/Kickstart 3.1.rom’
      kickstarts_dir ‘/home/pulp/Documents/FS-UAE/Kickstarts’
      maximized ‘1’
      quick_settings ‘1’
      save_states_dir ‘/home/pulp/Documents/FS-UAE/Save States’
      screenshots_output_prefix ‘default’
      state_dir ‘/home/pulp/Documents/FS-UAE/Save States/Default’
      stretch ‘1’
      themes_dir ‘/home/pulp/Documents/FS-UAE/Themes’
      whdload_quit_key  »
      FSUAE.start_with_config:
      [fs-uae]
      accelerator_memory = 262144
      amiga_model = A1200
      base_dir = /home/pulp/Documents/FS-UAE
      cdroms_dir = /home/pulp/Documents/FS-UAE/CD-ROMs
      config_path = /home/pulp/Documents/FS-UAE/Configurations/Default.fs-uae
      configurations_dir = /home/pulp/Documents/FS-UAE/Configurations
      controllers_dir = /home/pulp/Documents/FS-UAE/Controllers
      cpu = 68020
      end_config = 1
      fast_memory = 8192
      floppies_dir = /tmp/fs-uae-ws9f1xe8
      floppy_drive_speed = 0
      floppy_drive_volume_empty = 0
      floppy_image_0 = Save Disk.adf
      fullscreen = 0
      hard_drive_0 = WB
      hard_drive_1 = W1
      hard_drives_dir = /home/pulp/Documents/FS-UAE/Hard Drives
      joystick_port_0 = Mouse
      joystick_port_0_mode = mouse
      joystick_port_1 = Keyboard
      joystick_port_1_mode = joystick
      joystick_port_2 = none
      joystick_port_2_mode = none
      joystick_port_3 = none
      joystick_port_3_mode = none
      kickstart_file = /tmp/fs-uae-ws9f1xe8/Kickstart 3.1.rom
      kickstarts_dir = /home/pulp/Documents/FS-UAE/Kickstarts
      maximized = 1
      quick_settings = 1
      save_states_dir = /home/pulp/Documents/FS-UAE/Save States
      screenshots_output_prefix = default
      state_dir = /home/pulp/Documents/FS-UAE/Save States/Default
      stretch = 1
      themes_dir = /home/pulp/Documents/FS-UAE/Themes
      FSUAE.start_with_args: [‘/tmp/tmph8ln19br.fs-uae’]
      Find executable: fs-uae
      – Find executable in plugins dir
      Check executable /home/pulp/Documents/FS-UAE/System/FS-UAE/Linux/x86-64/fs-uae: YES
      -> /home/pulp/Documents/FS-UAE/System/FS-UAE/Linux/x86-64/fs-uae
      current dir (cwd): /home/pulp/Documents/FS-UAE/System/FS-UAE-Launcher/Linux/x86-64
      using fs-uae executable: /home/pulp/Documents/FS-UAE/System/FS-UAE/Linux/x86-64/fs-uae
      [‘/home/pulp/Documents/FS-UAE/System/FS-UAE/Linux/x86-64/fs-uae’, ‘/tmp/tmph8ln19br.fs-uae’]
      {‘SHELL’: ‘/bin/bash’, ‘SESSION_MANAGER’: ‘local/debian:@/tmp/.ICE-unix/924,unix/debian:/tmp/.ICE-unix/924’, ‘WINDOWID’: ‘69206023’, ‘QT_ACCESSIBILITY’: ‘1’, ‘COLORTERM’: ‘truecolor’, ‘XDG_CONFIG_DIRS’: ‘/etc/xdg’, ‘XDG_SESSION_PATH’: ‘/org/freedesktop/DisplayManager/Session0’, ‘XDG_MENU_PREFIX’: ‘xfce-‘, ‘SSH_AUTH_SOCK’: ‘/tmp/ssh-XXXXXXRxUHlp/agent.924’, ‘DESKTOP_SESSION’: ‘xfce’, ‘SSH_AGENT_PID’: ‘967’, ‘GTK_MODULES’: ‘gail:atk-bridge’, ‘XDG_SEAT’: ‘seat0’, ‘PWD’: ‘/home/pulp/Documents/FS-UAE/System/FS-UAE-Launcher/Linux/x86-64’, ‘LOGNAME’: ‘pulp’, ‘XDG_SESSION_DESKTOP’: ‘xfce’, ‘XDG_SESSION_TYPE’: ‘x11’, ‘PANEL_GDK_CORE_DEVICE_EVENTS’: ‘0’, ‘XAUTHORITY’: ‘/home/pulp/.Xauthority’, ‘XDG_GREETER_DATA_DIR’: ‘/var/lib/lightdm/data/pulp’, ‘HOME’: ‘/home/pulp’, ‘LANG’: ‘fr_FR.UTF-8’, ‘LS_COLORS’: ‘rs=0:di=01;34:ln=01;36:mh=00:pi=40;33:so=01;35:do=01;35:bd=40;33;01:cd=40;33;01:or=40;31;01:mi=00:su=37;41:sg=30;43:ca=00:tw=30;42:ow=34;42:st=37;44:ex=01;32:*.tar=01;31:*.tgz=01;31:*.arc=01;31:*.arj=01;31:*.taz=01;31:*.lha=01;31:*.lz4=01;31:*.lzh=01;31:*.lzma=01;31:*.tlz=01;31:*.txz=01;31:*.tzo=01;31:*.t7z=01;31:*.zip=01;31:*.z=01;31:*.dz=01;31:*.gz=01;31:*.lrz=01;31:*.lz=01;31:*.lzo=01;31:*.xz=01;31:*.zst=01;31:*.tzst=01;31:*.bz2=01;31:*.bz=01;31:*.tbz=01;31:*.tbz2=01;31:*.tz=01;31:*.deb=01;31:*.rpm=01;31:*.jar=01;31:*.war=01;31:*.ear=01;31:*.sar=01;31:*.rar=01;31:*.alz=01;31:*.ace=01;31:*.zoo=01;31:*.cpio=01;31:*.7z=01;31:*.rz=01;31:*.cab=01;31:*.wim=01;31:*.swm=01;31:*.dwm=01;31:*.esd=01;31:*.avif=01;35:*.jpg=01;35:*.jpeg=01;35:*.mjpg=01;35:*.mjpeg=01;35:*.gif=01;35:*.bmp=01;35:*.pbm=01;35:*.pgm=01;35:*.ppm=01;35:*.tga=01;35:*.xbm=01;35:*.xpm=01;35:*.tif=01;35:*.tiff=01;35:*.png=01;35:*.svg=01;35:*.svgz=01;35:*.mng=01;35:*.pcx=01;35:*.mov=01;35:*.mpg=01;35:*.mpeg=01;35:*.m2v=01;35:*.mkv=01;35:*.webm=01;35:*.webp=01;35:*.ogm=01;35:*.mp4=01;35:*.m4v=01;35:*.mp4v=01;35:*.vob=01;35:*.qt=01;35:*.nuv=01;35:*.wmv=01;35:*.asf=01;35:*.rm=01;35:*.rmvb=01;35:*.flc=01;35:*.avi=01;35:*.fli=01;35:*.flv=01;35:*.gl=01;35:*.dl=01;35:*.xcf=01;35:*.xwd=01;35:*.yuv=01;35:*.cgm=01;35:*.emf=01;35:*.ogv=01;35:*.ogx=01;35:*.aac=00;36:*.au=00;36:*.flac=00;36:*.m4a=00;36:*.mid=00;36:*.midi=00;36:*.mka=00;36:*.mp3=00;36:*.mpc=00;36:*.ogg=00;36:*.ra=00;36:*.wav=00;36:*.oga=00;36:*.opus=00;36:*.spx=00;36:*.xspf=00;36:*~=00;90:*#=00;90:*.bak=00;90:*.old=00;90:*.orig=00;90:*.part=00;90:*.rej=00;90:*.swp=00;90:*.tmp=00;90:*.dpkg-dist=00;90:*.dpkg-old=00;90:*.ucf-dist=00;90:*.ucf-new=00;90:*.ucf-old=00;90:*.rpmnew=00;90:*.rpmorig=00;90:*.rpmsave=00;90:’, ‘XDG_CURRENT_DESKTOP’: ‘XFCE’, ‘VTE_VERSION’: ‘7006’, ‘XDG_SEAT_PATH’: ‘/org/freedesktop/DisplayManager/Seat0’, ‘LESSCLOSE’: ‘/usr/bin/lesspipe %s %s’, ‘XDG_SESSION_CLASS’: ‘user’, ‘TERM’: ‘xterm-256color’, ‘LESSOPEN’: ‘| /usr/bin/lesspipe %s’, ‘USER’: ‘pulp’, ‘DISPLAY’: ‘:0.0’, ‘SHLVL’: ‘1’, ‘XDG_VTNR’: ‘7’, ‘XDG_SESSION_ID’: ‘2’, ‘XDG_RUNTIME_DIR’: ‘/run/user/1000’, ‘GTK3_MODULES’: ‘xapp-gtk3-module’, ‘XDG_DATA_DIRS’: ‘/usr/share/xfce4:/usr/local/share/:/usr/share/:/usr/share’, ‘PATH’: ‘/home/pulp/Documents/FS-UAE/System/FS-UAE-Launcher/Linux/x86-64:/usr/local/bin:/usr/bin:/bin:/usr/local/games:/usr/games’, ‘GDMSESSION’: ‘xfce’, ‘DBUS_SESSION_BUS_ADDRESS’: ‘unix:path=/run/user/1000/bus’, ‘OLDPWD’: ‘/home/pulp/Documents/FS-UAE/System/FS-UAE-Launcher/Linux’, ‘_’: ‘./fs-uae-launcher’, ‘LD_LIBRARY_PATH’: ‘/home/pulp/Documents/FS-UAE/System/FS-UAE-Launcher/Linux/x86-64’, ‘QT_PLUGIN_PATH’: ‘/home/pulp/Documents/FS-UAE/System/FS-UAE-Launcher/Linux/x86-64/PyQt5/Qt/plugins’, ‘QML2_IMPORT_PATH’: ‘/home/pulp/Documents/FS-UAE/System/FS-UAE-Launcher/Linux/x86-64/PyQt5/Qt/qml’}
      FS-UAE 3.1.66 (Built for Linux x86-64)
      Copyright 1995-2002 Bernd Schmidt, 1999-2017 Toni Wilen,
      2003-2007 Richard Drummond, 2006-2011 Mustafa ‘GnoStiC’ Tufan,
      2011-2017 Frode Solheim, and contributors.

      This is free software; see the file COPYING for copying conditions. There
      is NO warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR
      PURPOSE. See the README for more copyright info, and the source code for
      a full list of contributors

      UAE: Initializing core derived from WinUAE 3300b2
      LOG: /home/pulp/Documents/FS-UAE/Cache/Logs/fs-uae.log.txt
      libGL error: MESA-LOADER: failed to open radeonsi: /usr/lib/dri/radeonsi_dri.so: Ne peut ouvrir le fichier d’objet partag?: Aucun fichier ou dossier de ce type (search paths /usr/lib/x86_64-linux-gnu/dri:\$${ORIGIN}/dri:/usr/lib/dri, suffix _dri)
      libGL error: failed to load driver: radeonsi
      libGL error: MESA-LOADER: failed to open radeonsi: /usr/lib/dri/radeonsi_dri.so: Ne peut ouvrir le fichier d’objet partag?: Aucun fichier ou dossier de ce type (search paths /usr/lib/x86_64-linux-gnu/dri:\$${ORIGIN}/dri:/usr/lib/dri, suffix _dri)
      libGL error: failed to load driver: radeonsi
      libGL error: MESA-LOADER: failed to open swrast: /usr/lib/dri/swrast_dri.so: Ne peut ouvrir le fichier d’objet partag?: Aucun fichier ou dossier de ce type (search paths /usr/lib/x86_64-linux-gnu/dri:\$${ORIGIN}/dri:/usr/lib/dri, suffix _dri)
      libGL error: failed to load driver: swrast
      X Error of failed request: BadValue (integer parameter out of range for operation)
      Major opcode of failed request: 153 (GLX)
      Minor opcode of failed request: 3 (X_GLXCreateContext)
      Value in failed request: 0x0
      Serial number of failed request: 114
      Current serial number in output stream: 115
      LaunchHandler.start is done
      removing /tmp/tmph8ln19br.fs-uae
      LaunchHandler.update_changes

      ——————————————————————————-
      CHANGEHANDLER UPDATE
      SRC /tmp/fs-uae-ws9f1xe8
      DST /home/pulp/Documents/FS-UAE/Save States/Default
      create_file_version_list
      – found 3 files (checksummed)
      checking files
      done
      LaunchHandler.cleanup
      calling LaunchHandler.on_complete
      <Task « Amiga Launch Task »> succeeded
      TaskRunner.complete
      <fsui.qt.window.RealWindow object at 0x7f9001637940>.closeEvent
      RealWindow.__on_closed
      closed.emit
      Removing window reference <launcher.ui.launch.LaunchDialog object at 0x7f9001637a60>
      LaunchDialog.cancel
      Widget.on_destroy <fsui.qt.ImageView.ImageView object at 0x7f9001637700>
      Widget.on_destroy <fsui.qt.Button.Button object at 0x7f90016379d0>

      Sethghost

        2 janvier 2025 à 10h46 #382654

        Même configuration que toi :

        J’ai tout regroupé dans un dossier FS-UAE à l’emplacement ../Documents/FS-UAE
        1. Le FS-UAE_Launcher : …/Documents/FS-UAE/FS-UAE-Launcher/Linux/x86-64/fs-uae-launcher
        2. Le FS-UAE (executable) qui est lui même dans :
        * …/Documents/FS-UAE/FS-UAE/Linux/x86-64/fs-uae
        * et aussi : le paquet d’origine fs-uae contenant l’executable livré avec les paquets Debian est TOUJOURS dans /usr/bin/fs-uae

        J’ai installé à la main (téléchargé fs-uae et le launcher sur le site officiel) parce que le frontend (fs-uae-launcher) ne voyait pas fs-uae.
        fs-uae et son launcher n’étaient plus mis à jour à l’époque de ce bricolage. (à vérifier si c’est encore le cas)
        Il y a probablement une méthode plus simple mais fs-uae-launcher fonctionne.

        Hors-sujet : Préférence à utiliser winuae sous wine (malgré la fonction de reconnaissance des disques durs physiques non reconnue).

        Vite, un panneau solaire.

        pulp

          3 janvier 2025 à 12h04 #382671

          J’ai tout comme toi et ça ne marche pas mais ce n’est pas bien grave. Je peut continuer à lancer l’ému à la main.

          J’ai aussi essayé vite fait fs-uae-arcade mais il reste vide et je ne sais pas scanner mes dossiers dans le launcher. Je vois bien que tout ça est plus maintenu 🙁

          Je testerai winuae dans wine.

          J’ai aussi essayé amiberry mais j’avais des latences dans le son que j’avais pas avec fs-uae.

          Sethghost

            3 janvier 2025 à 13h44 #382677

            Il n’y a pas de raison que ça ne marche pas 🙂
            Capture-du-2025-01-03-13-25-07
            La structure de mon répertoire FS-UAE dans /Documents/
            * – Pour vérifier que tout fonctionne, je lance les deux exécutables dans un terminal (normalement lancé par une icone du lanceur gnome)
            ./fs-uae-launcher (ou tout simplement fs-uae-launcher) situé dans : /Documents/FS-UAE/FS-UAE-Launcher/Linux/x86-64$/fs-uae-launcher
            Version 3.1.68 OK
            * – Je lance ./fs-uae (fs-uae pour l’exe des paquets officiels debian)
            qui est dans : /Documents/FS-UAE/FS-UAE/Linux/x86-64$
            Version 3.1.66 OK
            Au passage, fs-uae-launcher tente de se connecter à : fsuae.net (mais ce n’est pas grave)

            Il faut vérifier que les 2 exe sont bien executables chmod +x fs-uae, chmod +x fs-uae-launcher
            et ça roule :

            Vite, un panneau solaire.

            mikedafunk

              4 janvier 2025 à 7h43 #382688

              Hello pulp!

              Comme sethghost, je ne vais pas pouvoir beaucoup t’aider car chez moi cela a fonctionné du premier coup
              Test effectué avec un kubuntu 24.04 fraichement installé en virtualisation ce matin pour l’occasion, installation de fs-uae depuis la logithèque discover

              Création rapide d’une config 1200 68060 JIT 64Mo HD 400Mo, et ça fonctionne du feu de dieu

              Par contre comme toi je n’ai pas creusé pour fs-uae arcade…

              https://ilovepouet.over-blog.net/

              Sethghost

                4 janvier 2025 à 10h03 #382690

                Et sinon dans paramètres de fs-uae-launcher ? en ajoutant simplement le(s) chemin(s) vers fs-uae ?

                Ou alors en touchant aux liens symboliques et aux PATH histoire de compliquer davantage les choses, hé hé hé, tu peux toujours retirer un lien symbolique : rm /chemin/vers/le/lien_symbolique
                Un truc du genre :
                ln -s /usr/bin/fs-uae ~/Documents/FS-UAE/FS-UAE/Linux/x86-64/fs-uae
                export PATH= »$HOME/Documents/FS-UAE/FS-UAE/Linux/x86-64/:$PATH » dans ~/.bashrc
                Mais prudence avant de bricoler des liens symboliques et autres chemins. Il y a toujours plus simple.

                Vite, un panneau solaire.

                piark

                  4 janvier 2025 à 12h48 #382696

                  c’est un problème de preload de lib…..

                  j’ai galéré avant de trouver !

                  met ça dans un fichier shell en lanceur et ça devrait aller (tu remplace le chemin de mon exemple par le chemin qui va bien)

                  #!/bin/sh
                  export LD_PRELOAD=/usr/lib/x86_64-linux-gnu/libstdc++.so.6
                  cd /home/piark/Documents/FS-UAE/System/
                  ./FS-UAE-Launcher/Linux/x86-64/fs-uae-launcher | tee -a /home/piark/Documents/FS-UAE/System/fs-uae-launcher.log

                  piark

                    4 janvier 2025 à 12h54 #382697

                    je précise que j’ai téléchargé les archives de fs-uae du net et pas celles de debian/ubuntu/autre…..

                    mais je suppose que la version package peut fonctionner, cependant il faudra alors rajouter le ld_preload quelquepart…

                    en fait dans la liste des packages proposés par ma distro y’a pas le launcher je suppose qu’ils ne l’ont pas compilé pour ces versions de distrib d’ou le problème.

                    pulp

                      4 janvier 2025 à 18h38 #382705

                      @Piark Merci, j’ai pas tout compris mais avec ton petit script ça marche 🙂


                      @Sethghost                       Merci d’avoir cherché 🙂

                      • Cette réponse a été modifiée le il y a 3 heures et 21 minutes par pulp.

                      mikedafunk

                        4 janvier 2025 à 20h16 #382713

                        Même config, même problématique
                        Ce script fonctionne effectivement avec Debian 12.8

                        En copiant le script au bon endroit (Documents/Fsuae) et en mettant les chemins absolus
                        cd System/
                        Le script serait éligible « portable », exactement comme sous Windows
                        Cela m’a été très pratique pour les démos 060 dans la compilation « I love Pouet »

                        https://ilovepouet.over-blog.net/

                      10 sujets de 1 à 10 (sur un total de 10)

                      • Vous devez être connecté pour répondre à ce sujet.

                      › Forums › AmigaOS, MorphOS et AROS › Émulation et autres OS › FS-UAE Launcher

                      Amiga Impact